Tapping machines are widely used in drilling and tapping of porous parts in the mechanical industry, with high workpiece precision and fast manufacturing speed. However, due to the different states of each tap, a large amount of waste is caused by workpiece scrap caused by abrasion and fracture of individual taps.
2019-09-16 Yixin Precision Metal and Plastic Ltd
With the increasing popularity of cutting technology, higher and higher requirements are put forward for the manufacturing of cutting tools.
2019-09-12 Yixin Precision Metal and Plastic Ltd
Stamping is a technological method that applies pressure to the material by using the die on the press at room temperature to separate or deform the material so as to obtain the required parts.
2019-09-11 Yixin Precision Metal and Plastic Ltd
Metal drawing is a deformation process in which an external force acts on one end of the drawn metal to pull the metal blank out of a die hole smaller than the cross section of the blank to obtain products with corresponding shapes and sizes.
2019-09-10 Yixin Precision Metal and Plastic Ltd
Using a cold header to make the heads of screws, bolts, rivets, etc. can reduce or replace the cutting process. It is characterized by a wide variety of specifications and different performance and uses.
2019-09-09 Yixin Precision Metal and Plastic Ltd
With the development of industry, various materials with high strength, high hardness, high temperature resistance and corrosion resistance are increasingly used in the metalworking industry. Such as high-strength steel, large hard gear, copper sleeve parts, etc.
2019-09-07 Yixin Precision Metal and Plastic Ltd