cnc-turning-service
 cnc-machining-service

​Characteristics of New Bearing Grinding Process

2019-08-26 Yixin Precision Metal and Plastic Ltd

Bearing is an important component in contemporary mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient in the process and ensure its accuracy. Rolling bearings generally consist of four parts: outer ring, inner ring, rolling body and cage. Grinding is the most complicated process in the whole bearing manufacturing process, so how to finish the grinding process with high precision and high efficiency is the main task of grinding for one of the key processes in the bearing. What are the characteristics of the new bearing grinding process:

I. Characteristics of New Bearing Grinding

(1) High-speed bearing grinding process

High-speed grinding improves quality and efficiency. In high-speed grinding, besides sufficient strength, good grinding performance should be ensured.

(2) New bearing grinding and sanding

The manufacture, dressing, special bearing grinding machine and grinding oil of new type of sand mill meet the progress of grinding technology.

(3) bearing grinding CNC use

The numerical control machine tool can ensure accuracy at both high speed and low speed, and can complete fast jumping, fast driving, trimming, rough and fine grinding.

Second, the new bearing grinding scheme

(1) Bearing clamping method

When grinding the bearing, the large excircle and process angle after correction of precision can avoid the grinding runout of the central hole seat surface.

(2) cutting allowance of bearing

Cutting allowance ensures high-efficiency and high-precision bearing grinding. Usually, the fine grinding allowance is in microns.

(3) Selection of grinding tools for bearings

High-speed grinding is adopted to ensure that the abrasive dust will not stick and block during the grinding process and maintain good self-sharpness.

(4) bearing grinding speed

The rotating speed of the workpiece is related to the diameter of the grinding surface of the bearing. The rotating speed of the workpiece will greatly affect the grinding cut and surface roughness. A low rotating speed will cause ripples on the grinding surface and increase the residual stress on the surface. A high rotating speed will cause burns on the grinding surface.

Three, the new bearing grinding problem

(1) bearing accuracy

Bearing accuracy is mainly formed by machine tool accuracy, fixture accuracy and grinding process parameters. Therefore, it is also an important parameter to reasonably determine the grinding value of CNC machine tools.

(2) bearing burns

In the process of bearing grinding, the phenomenon of grinding burn will occur if the process parameters are unreasonable or the dimensional accuracy of the blank is not well controlled. The main factors causing this kind of grinding burn are low linear speed of grinding and low cutting force.

(3) bearing crack problem

When the selection of grinding parameters is unreasonable, cracks or fine cracks will occur on the grinding surface of the central hole seat surface after grinding, especially the cracks at the seat pressure chamber will cause cavitation on the front edge of the seat and reduce the fatigue strength of the bearing.

Four, the selection of new grinding oil

(1) Extreme Pressure Performance of Grinding Oil

Special grinding oil contains sulfurized extreme pressure antiwear additive, which can effectively protect grinding tools and improve process accuracy.

(2) Chemical Properties of Grinding Oil

Special grinding oil has good chemical stability and will not cause harm to equipment, human body and environment.

(3) other properties of grinding oil

Special grinding oil has passed strict tests in viscosity, flash point, pour point and thermal conductivity to meet various technological requirements.

The above is the treatment plan after the metal grinding process goes wrong. High-quality raw materials are the premise to obtain good grinding quality. In addition, the grinding process precision is closely related to the workpiece surface condition and heat treatment process.

If you like this content, please support us more.

We design, produce and process all kinds of parts, with low price and fast construction period. If you are interested, you can learn more on our website.

Source of this article:https://www.ymp.com.hk/


Contact Us

  • Yixin Precision Metal and Plastic Ltd
  • Address:Shajing Road 211-3, Shatou Industrial Park, Shajing Street, Bao'an Distrist, Shenzhen(518104), China
  • Tel:86-0755-2756 6993
  • Phone:86-1893 8911 183
  • E-mailsale01@ymp.com.hk